US APPROVED 2.432 Ghz WIRELESS VIDEO CAMERA WITH 4 CHANNEL RECEIVER
RUN WIRELESS & WIRED AT THE SAME TIME!
The Single Camera System That Has It All. The perfect system for those
who do not need a bunch of cameras. A single Night Vision CMOS wireless
camera with Infra-Red LED's that turn on automatically when the light
get's too low and shuts off automatically when their is plenty of light
for the camera. The 2.4 GHZ 4 channel receiver is switchable between 4
channels with a handly switch mounted on the side. It has 2 audio and 2
video outputs so you can hook it up to both a monitor and a VCR or DVR
simultaneously. Since there are 4 channels in the receiver, you could
run 4 seperate cameras (on different broadcast frequencies) and manually
switch between them. You can also run the camera hard wired and wireless
at the same time. For example, you could hard wire the camera to your
monitor and have the wireless receiver and a recorder hidden in a locked
closet where a burgular could not access it.
Take note of the new easy install camera mount. This will save lots of
time on the initial installation, or if you are moving the camera from
place to place, you won't have to spend much precious time mounting it
in each new location.
The camera in this system can be used with the receiver of any SPYCAM1.